DYNAMIXEL XW540-T260-R

SKU: MBS-ANT-72
GTIN: 8809677570142
Category: Electronics
Manufacturers:

DYNAMIXEL XW540-T260-R Servomotor

Dynamixel X-Series Actuator
RS-485 Interface
9,5N.m
40RPM
40rpm
Waterproof

€ 1.254,95

incl. 19% VAT , plus

Must be ordered. Ready for shipment in 21 days after order.
Delivery time: 6 - 9 Workdays (DE - int. shipments may differ)

The Dynamixel X-Series, is currently the latest network servo motor series, from ROBOTIS. The XW540-T260-R servomotor has contactless magnetic encoders, allowing 360° rotations at a speed of up to 40 rpm. Torques of up to 9.5N.m with an applied voltage of up to 14.8V are possible. These outstanding performance features combined with the extremely low weight of only 185g result in a very powerful servo motor for universal applications.

Waterproof

The DYNAMIXEL XW540-T260-R has the novelty of being completely waterproof and can therefore be used near and in water.

Technical data

Servomotor: XW540-T260-R
Weight: 185g
Dimensions: 33,5 x 58,5 x 45,9mm
Gearbox reduction ratio: 260,6:1
Torque: 9,5N.m
rpm: 12V 40
Internal uC: 72MHz Cortex M3
Encoder: Contactless magnetic encoder
Positioning accuracy: 0,0879° x 4096 steps
Operating voltage: 10 - 14,8V (Recommended: 12V)
Protocol: RS-485
ID: 0 - 252
Baud Rate: 9600 bps - 4,5Mbps

DANGER
(May cause serious injury or death)

Do not place flammable materials near the product.
Keep fingers, hands, toes, and other body parts away from the product while it is operating.
Immediately turn off the device if unusual odors or smoke appear.
Store the product out of reach of children.
Check the polarity of the power source before connecting any wiring.

CAUTION
(May cause injury or damage to the product)

Adhere to the recommended environmental conditions (maximum depth of 1 m, maximum 24 hours in standard fresh water).
Do not pull on the rubber cap of the connector.
The rubber cap is tightly connected to the seal; any deformation can lead to leakage.
The rubber cap is dust-resistant but not waterproof. For underwater use, please connect a waterproof cable.
Do not insert blades or other sharp objects into the device during operation.

ATTENTION
(May cause injury or damage to the product)

Do not disassemble or modify the product.
Do not drop the product or expose it to strong Impacts.

Scope of delivery

1 x Dynamixel XW540-T260-R Servomotor
1 x Servo horn (HN13-N105)
1 x data and power cable
Various screws and nuts

Shipping weight:	0,40 kg
Item weight:	0,19 kg

Manufacturer Information ROBOTIS

There are no reviews yet.

Unsere NEWS

UFactory xArm6 Review & ROS ...

UFactory xArm6 Low cost & lightweight robot arm Fully made of carbon fiber ROS1 & ROS2 Support Gazebo, Moveit & RViZ

Lohnenswertes Upgrade für die X Carve

Die Lieferunge erfolge schnell unkompliziert und sehr zufriedenstellend. Die Montage benötigt seine Zeit, bei mir dauerte es etwas länger, da...

- Tom S., Inventables X-Carve Upgrade Kits

Lohnenswertes Upgrade für die X Carve

Die Lieferunge erfolge schnell unkompliziert und sehr zufriedenstellend. Die Montage benötigt seine Zeit, bei mir dauerte es etwas länger, da...

- Tom S., Inventables X-Carve Upgrade Kits

Lohnenswertes Upgrade für die X Carve

Die Lieferunge erfolge schnell unkompliziert und sehr zufriedenstellend. Die Montage benötigt seine Zeit, bei mir dauerte es etwas länger, da...

- Tom S., Inventables X-Carve Upgrade Kits

Social Media

Why not follow us on one of the following social media channels?

DYNAMIXEL XW540-T260-R

Unsere NEWS

Das sagen unsere KUNDEN

Lohnenswertes Upgrade für die X Carve

Lohnenswertes Upgrade für die X Carve

Lohnenswertes Upgrade für die X Carve

Our Instagram FEEDS

Social Media