Localino RTK Fly

Localino RTK Fly – GPS RTK Module with Integrated 2.4 GHz RTCM Receiver

The Localino RTK Fly is a compact, high-performance GPS RTK receiver based on the u-blox F9P, enabling centimeter-level positioning accuracy. Thanks to the integrated 2.4 GHz radio receiver for wireless transmission of RTCM3 correction data, no dedicated hardware RTK base station is required. The module is specifically designed for use in drones and UAV flight controllers and can be connected directly via UART.

Key Features

• GPS RTK positioning with accuracy of up to ±2 cm
• u-blox F9P multi-band GNSS (L1/L5)
• Integrated 2.4 GHz radio receiver for RTCM3 correction data
• Support for virtual RTK base stations (NTRIP / Internet RTCM)
• Multi-rover capable: one RTCM data stream for multiple receivers
• Direct UART connection to flight controllers
• USB-C interface for power supply and configuration
• Compact design, compatible with 30 × 30 mm stacks (e.g. SpeedyBee)

Technical Specifications

GNSS & RTK

• GNSS module: u-blox F9P
• Frequency bands: L1 / L5
• Correction data: RTCM3

Radio & Interfaces

• Radio link: 2.4 GHz WiFi (u.FL)
• UART2: GNSS / RTK output (115200 baud, UBX protocol)
• UART1: RTCM3 correction input
• USB-C
• I²C

Antenna Connectors

• SMA: GNSS antenna (L1/L5)
• SMA: PPS
• u.FL: 2.4 GHz

Electrical Characteristics

• Supply voltage: 5 V DC (max. 5.9 V)
• Power supply: via flight controller or USB-C
• ESD protection on all inputs, outputs, and RF ports

Dimensions and Mounting

• Dimensions: 39.5 × 39.5 mm
• Mounting: 30.5 × 30.5 mm mounting pattern

Compatibility

• Firmware: ArduPilot, Betaflight, INAV
• Flight controllers: Pixhawk, SpeedyBee, and other UART-based systems

Applications

• Drone & UAV navigation
• Surveying & mapping
• Autonomous vehicles
• Precision landing
• Research and development projects

Scope of Delivery

• Localino RTK Fly Module incl. F9P 
• Localino 2.4 GHz WiFi Interface 
• no GPS or Wifi antennas included
• Quick start guide