OpenMV GENX320 Event Camera Module (V4)

SKU: MBS-SES-417
GTIN: 0658917504878
Category: Sensors
Manufacturers:

Dynamikbereich bis 140 dB
Messprinzip Event-basiert (asynchron, pixelweise Änderungsdetektion)

€ 479,95

incl. 19% VAT , plus

Available immediately
Delivery time: 15 - 17 Workdays (DE - int. shipments may differ)

The OpenMV GenX320 Camera Module is an event-based camera module built on the Prophesee GenX320 neuromorphic vision sensor. Unlike conventional frame-based cameras that capture entire images at fixed intervals, the GenX320 detects only changes in a scene – pixel by pixel, asynchronously and independently. This results in extremely low data rates even at high speeds, eliminates the need for background subtraction, and enables event histograms at over 375 Hz.

Inspired by the human retina, the sensor offers a dynamic range of up to 140 dB, making it reliable even in extreme lighting conditions – from near-total darkness (threshold 0.05 lux) to brightly lit scenes. Power consumption starts at just 3 mW during active streaming, making the sensor ideal for battery-powered applications. The module integrates seamlessly into the OpenMV IDE and is fully programmable in MicroPython.

Typical application areas include high-speed object tracking and counting, LED frequency detection in the kHz range, fluid and particle flow monitoring, and any scenario where traditional cameras are limited by motion blur, high power consumption, or insufficient dynamic range.

Technical Specifications

Sensor
Sensor Type	Prophesee GenX320 (neuromorphic event sensor)
Measurement Principle	Event-based (asynchronous, per-pixel change detection)
Performance Parameters
Max. Event Histogram Rate	375 Hz+ (with OpenMV Cam H7 Plus) / 350 Hz (with RT1062)
Dynamic Range	up to 140 dB
Min. Power Consumption (streaming)	3 mW
Low-Light Detection Threshold	0.05 lux
Ambient Light Range	< 5 lux to brightly lit scenes
Configuration & Filters
Analog Bias Presets	High-speed, low-light, high-frequency (via IOCTRL)
ESP Filters	Frequency filter, Event Rate Controller
Mechanical Properties
Dimensions	35 × 16 × 10 mm
Operating Temperature	0 °C – +60 °C
Compatibility & Software
Compatible Host Boards	OpenMV Cam H7 Plus, OpenMV Cam RT1062, OpenMV N6
Programming Language	MicroPython (via OpenMV IDE)
SDK / Library	OpenMV Machine Vision Library, ready-to-use examples included

Scope of Delivery

1× OpenMV GenX320 Event Camera Module
Note: OpenMV Cam H7 Plus, RT1062, or N6 are not included and must be purchased separately

Manufacturer Information OpenMV

There are no reviews yet.

Unsere NEWS

Explore Cutting-edge Robotics and Imaging Technology Innovations

Turtlebot3 Integration with Astra S ...

Comprehensive Guide to Integrating Astra S U3 Camera with Turtlebot3 for Enhanced Robotics Capabilities - Advanced Features, Setup, and Use Cases ...

Lohnenswertes Upgrade für die X Carve

Die Lieferunge erfolge schnell unkompliziert und sehr zufriedenstellend. Die Montage benötigt seine Zeit, bei mir dauerte es etwas länger, da...

- Tom S., Inventables X-Carve Upgrade Kits

Lohnenswertes Upgrade für die X Carve

Die Lieferunge erfolge schnell unkompliziert und sehr zufriedenstellend. Die Montage benötigt seine Zeit, bei mir dauerte es etwas länger, da...

- Tom S., Inventables X-Carve Upgrade Kits

Lohnenswertes Upgrade für die X Carve

Die Lieferunge erfolge schnell unkompliziert und sehr zufriedenstellend. Die Montage benötigt seine Zeit, bei mir dauerte es etwas länger, da...

- Tom S., Inventables X-Carve Upgrade Kits

Social Media

Why not follow us on one of the following social media channels?

OpenMV GENX320 Event Camera Module (V4)

Unsere NEWS

Das sagen unsere KUNDEN

Lohnenswertes Upgrade für die X Carve

Lohnenswertes Upgrade für die X Carve

Lohnenswertes Upgrade für die X Carve

Our Instagram FEEDS

Social Media