Benewake TF02-i LiDAR IP65 (40m)

SKU: MBS-SES-157
GTIN: 0618455044717
Category: LiDAR
Manufacturers:

Benewake TF02-i LiDAR

Measurement distance: 0,1 - 40m
Resolution < 2%
Lightness: <100k LUX
Small Dimensions: 69 x 41,5 x 31,5mm
Weight: 60g
compatible with Pixhawk

Description

The Benewake TF02-i is one of the best selling products of the manufacturer. Due to the high measurement range and the low measurement tolerance the TF02 can navigate drones with a very high precision. Therefore and due to the TF02 LiDAR beeing able to function with a ambient brightness of only 100k LUX the TF02 is very popular for developers of autonomus aircrafts, such as drones.

Provided UAV-Controllers

Following controllers will be provided by the Benewake TF02-i LiDAR.

Pixhawk
APM
TopXGun
EFY Technology
aiAero
DAISCH

A guidance regarding the start-up of the TF-Series with a Pixhawk Drone Controller can be found HERE.

Technical data

Measurement Distance: 0,1 - 40m
Measuring Error: 2%
Frequency: 100Hz
Protection Class: IP65
Lightness: 100k LUX
Power: 5V DC / < 200ma
Dimensions: 69 x 41,5 x 31,5mm
Weight: 52g

Scope of delivery

Benewake TF02-i LiDAR

Item information	Value
Shipping weight:	0,17 kg
Item weight:	0,13 kg

Reviews

There are no reviews yet.

PDF (1)

Configure TF Series with Pixhawk

Configure TF Series with Pixhawk

Version

€ 123,95

incl. 19% VAT , plus

Available immediately

This item has variations. Please select the requested variation.

Others also bought:

Holybro Pixhawk vibration dampers Foam Pads

Holybro vibration dampers

20 pieces
Pixhawk Flight Controller optimized

€ 9,00 *

Pixhawk 12S Power Module PM02 V3

Pixhawk Power Module

PM02 V3
5,2V BEC 3A
Current: 0 - 120A
Input Voltage: 2 - 12S (7-51V)

€ 25,95 *

SIYI Pixhawk 6C to SIYI Air Unit Cable

Connector: Pixhawk 4/Pixhawk 4 Mini/ Pixhawk 6C to SIYI MK15/HM30 Air Unit
JST GH 3pin to JST GH 5pin
Length: 250mm

€ 11,95 *

Spare Parts-JST GH 10Pin cable 150mm

Spare Parts-JST GH 10Pin cable

compatible with all PX4 or products using the GH series
length: 150mm

€ 10,95 *

Holybro X500 V2 PDB Board (With XT30 Pre-soldered)

Holybro X500 V2 PDB board (with pre-soldered XT30)

central power distribution board specially developed for use in the X500 V2 drone kit
efficient distribution
Pre-installed connections: The board has a pre-soldered XT60 connection for the power module and battery as well as pre-soldered XT30 connections that harmonize perfectly with the ESCs and motors of the X500 V2.
It is designed for a continuous current of up to 60A and can handle currents of up to 120A for short periods (less than 60 seconds).
Hole spacing of 45x45mm

€ 12,95 *