Luxonis OAK SoM MAX

SKU: MBS-SES-274
Category: 3D Machine Vision
Manufacturers:

Luxonis OAK SoM MAX

Three versions available
- OAK-SoM MAX (6x 2-lane MIPI, default configuration)
- OAK-SoM-MAX-1 (4x 2-lane MIPI, 1x 4-lane MIPI)
- OAK-SoM-MAX-2 (2x 2-lane MIPI, 2x 4-lane MIPI)

Version

Price on request

Available immediately

This item has variations. Please select the requested variation.

The OAK-SoM MAX is perfect for applications in industrial automation, robotics and security systems. It features the Robotics Vision Core 3 and a quad-core ARM CPU. It connects to the system via three 10-Gbps compatible 100pin board-to-board mezzanine connectors. All signal I/O and 5V input are transferred. The 5V input and regulated by the integrated SMPS system. It also provides all necessary digital and analog power supplies. Integration with top-level systems requiring low-power, high-performance real-time AI and depth perception is enabled.

Features

This module is based on the RVC3

3.0 TOPS for AI
imaging: ISP, max. 6 cameras, 500 MP/s HDR, 3A
executes any AI model, as well as custom developed models
Encoding/Decoding: H.264, H.265, MJPEG - 4K/30fps, 1080P/60fps
Computer vision: warp/dewarp, resizing, cropping, edge detection, object tracking
Stereo depth perception with filtering, post-processing, RGB depth matching, and high configurability
Object tracking: 2D and 3D tracking
Dimensions: 40x40x4 mm
Weight: 5g

Technical data

Interface to the system: three 100pin 10Gbps connectors (DF40C-100DP-0.4V (51))
4GB RAM (2x 16GBit)
Connectors: 3x 100pin mezzanine connector (makes additional MIPI RX/TX lines accessible)
6x 2-lane MIPI RX lines
2x 2-lane, 1x 4-lane MIPI TX lines
RAM: 2x DDR RAM on-board (provides maximum performance)
voltage level: all 12C-buses at 1.8V
Pull-up resistors: 2.2k-pull-up resistors on SoM
Min/max data rates: Robotics Vision Core supports the following on 12C-buses:
- Standard Mode: 100kHz
- Fast Mode: 400kHz
- Fast Mode Plus: 1MHz
- High-Speed Mode: 3.4MHz
12C0 bus: RTC circuit (address: 0xD2) and EEPROM (address: 0x50)
USB 3.1 Gen 2