Description
Four legs or four wheels? The Unitree AS2-W answers that question with a clear „both“. As the wheeled-leg variant of the AS2 platform, it combines the off-road behaviour of a legged robot with the speed and efficiency of a wheeled vehicle – switching between the two modes of locomotion on the fly.
This is made possible by a drive concept with 16 degrees of freedom: each of the four legs carries an additional powered wheel. On paved ground the AS2-W rolls along at up to 3.7 m/s, with peaks of around 6 m/s. When the terrain gets rough, the legs take over – slopes of roughly 45°, steps up to 30 cm high and obstacles from 0.4 to 0.8 m are no obstacle at all. The in-house joint motors deliver a maximum torque of around 95 N·m.
The load capacity is impressive: the AS2-W holds up to 150 kg while standing, and in continuous operation it reliably carries 16 kg over a distance of approximately 25 km. Without a load, more than 30 km and over three hours of runtime are possible – enough for long inspection and reconnaissance missions.
Environmental perception is handled as standard by an industrial LiDAR with 64 to 128 lines, complemented by an HD camera, microphone array and lighting. With ISS 3.0, the robot follows its operator autonomously through complex environments. Communication runs via WiFi 6, Bluetooth 5.2, Gigabit Ethernet and SBUS.
Particularly interesting for research and education: all AS2-W versions are cleared for your own further development. You receive robot models, simulation interfaces, comprehensive development manuals and support for Isaac Sim and other simulation environments. Thanks to the UniStore platform and continuous OTA updates, the system stays up to date permanently.
The five configuration levels differ mainly in compute power and sensors – from the entry-level AS2-W X through to the fully equipped EDU Ultimate with a 100 TOPS compute unit, three depth cameras and an additional Livox Mid-360 including navigation algorithms.
A rugged aluminium and composite build, IP54 protection and an operating range from −20 °C to +50 °C make the AS2-W a dependable tool – in the lab just as much as out in the field.
Overview
- Available in five versions: X, EDU Standard, EDU Smart, EDU Plus, EDU Ultimate
- Programmable out of the box – secondary development enabled on all versions
- Total weight: 25 kg (including battery)
- Runtime: 2 – 3+ hours (depending on application)
- Dimensions: 72 cm × 49 cm × 52 cm (standing)
- Industrial LiDAR with 64–128 lines as standard
- IP54 protection rating, operating temperature −20 °C to +50 °C
Version comparison
| Feature | X | EDU Standard | EDU Smart | EDU Plus | EDU Ultimate |
| Compute unit (expansion dock) | optional | Jetson Orin Nano, 40 TOPS | 100 TOPS | 100 TOPS | 100 TOPS |
| Depth camera | – | optional | 1× | 1× | 3× |
| Livox Mid-360 LiDAR incl. navigation algorithms | – | – | – | 1× | 1× |
| Charging dock | optional | ? | ? | ? | ? |
| Handheld remote | ? | ? | ? | ? | ? |
| AI algorithm support | – | ? | ? | ? | ? |
| Secondary development | ? | ? | ? | ? | ? |
Technical data
| Dimensions (standing) | 721 × 493 × 521 mm |
| Dimensions (folded) | 768 × 602 × 211 mm |
| Tire size | 7 inch (Ø 178 mm, width 50 mm) |
| Weight | approx. 25 kg (including battery) |
| Material | Aluminium alloy + high-strength engineering plastic |
| Degrees of freedom | 16 (joint motors) |
| Max. joint torque | approx. 95 N·m |
| Range of motion | Body −45° to 45° · thigh −115° to 200° · calf −159° to −47° |
| Motor type | Internal-rotor PMSM, low inertia, high speed, industrial crossed roller bearings |
| Encoder / cooling | Dual encoder · local air cooling |
| Speed | 0 – 3.7 m/s (peak approx. 6 m/s) |
| Slope climbing | approx. 45° |
| Step height / max. climbing height | 30 cm / approx. 0.4 – 0.8 m |
| Payload (standing) | approx. 150 kg |
| Payload (continuous, in motion) | approx. 16 kg |
| Battery | Li-ion 36 – 50.4 V · long-endurance battery 15,000 mAh ×1 |
| Runtime without load | > 3 h (approx. 30 km) |
| Runtime with 16 kg | > 2 h (approx. 25 km) |
| Charger | Fast charger 50.4 V / 7.4 A |
| Compute unit | 8-core CPU (+ expansion dock depending on version) |
| Sensors | HD camera · industrial LiDAR 64–128 lines ×1 · microphone array |
| Interfaces | WiFi 6 · Bluetooth 5.2 · Gigabit Ethernet ×1 · SBUS ×1 |
| Positioning | GPS and 4G – disabled ex works, enabled only after user authorisation; mainland China version only |
| Additional features | ISS 3.0 intelligent follow · speaker · lighting |
| Operating temperature | −20 °C to +50 °C |
| Protection rating | IP54 |
| Software | UniStore platform · smart OTA updates · secondary development · Isaac Sim support |
| Warranty | 1 year |
Scope of delivery
| Item | X | EDU Standard | EDU Smart | EDU Plus | EDU Ultimate |
| Unitree AS2-W robot | ? | ? | ? | ? | ? |
| Long-endurance battery 15,000 mAh | 1× | 1× | 1× | 1× | 1× |
| Fast charger 50.4 V / 7.4 A | ? | ? | ? | ? | ? |
| Contact charging dock | – | ? | ? | ? | ? |
| Handheld remote (dual-hand controller) | ? | ? | ? | ? | ? |
| Industrial LiDAR 64–128 lines | ? | ? | ? | ? | ? |
| HD camera | ? | ? | ? | ? | ? |
| Microphone array, speaker, lighting | ? | ? | ? | ? | ? |
| Compute expansion dock | – | 40 TOPS | 100 TOPS | 100 TOPS | 100 TOPS |
| Depth camera | – | – | 1× | 1× | 3× |
| Livox Mid-360 LiDAR | – | – | – | 1× | 1× |
| Development manuals, robot models, simulation interfaces | ? | ? | ? | ? | ? |
Optional accessories
| Item | Key data |
| Dual-hand remote controller | 2.4 GHz · data transmission module + Bluetooth · charging 5 V / 2 A · 4.5 h operating time · range > 100 m |
| Standard battery | 8,000 mAh · IS 16046 (Part 2) / IEC 62133-2 · in-house BMS with charge level indication, storage self-discharge protection, balance charging protection, overcharge, over-discharge, short-circuit and battery load detection protection |
| Long-endurance battery | 15,000 mAh · same standards and protection features |
| Standard charger | 210 × 108 × 48.2 mm · input 100–240 V~, 50/60 Hz, 4 A · output 34.0 V / 3.5 A / 119 W · charging time 2 h and 4 h respectively |
| Fast charger | 210 × 108 × 48.2 mm · input 100–240 V~, 50/60 Hz, 4 A · output 33.6 V / 9.0 A / 302.4 W · charging time 0.8 h and 1.5 h respectively |
| Contact charging plate (AS2 / AS2-W) | Assembly for contact-based charging |
| Depth camera | Retrofittable for X and EDU Standard |
Reviews
There are no reviews yet.