Holybro PM08 Power Module

SKU: MBS-PDB-17
GTIN: 0658917503604
Category: Power Distribution Boards (PDB)
Manufacturers:

Aluminium case
Input Voltage: 2S-14S
Output: DC 5.1-5.3V & 3A Max
not for Pixhawk 5X/6X

119,95 €

incl. 19% VAT , plus

Goods ordered. 1 expected on 03.05.2024.
Delivery time: 8 - 11 Workdays (DE - int. shipments may differ)

Holybro's PM08 power module is designed for vehicles with high power requirements. The module is installed in an aluminum heat sink housing with fan. Thus, it is protected from external influences and is able to actively dissipate the heat generated during operation. This ensures long durability and optimal performance.

The PM08 supplies the flight controller with regulated 5.2V from the battery and also simultaneously delivers current consumption and battery voltage measurements to the autopilot via an analog signal through a 6-pin JST-GH cable.

Attention

this analog power module is not suitable for 5X/6X
for the 5X/6X series please use a digital power module ending with "D"

Technical data

Input Voltage: 2S-14S
PCB Cont. current Rating: 200A
PCB burst current Rating: 1000A (<1 sec @25C)
Max. current sensing: 237,6A
Output: DC 5,1 - 5,3 V & 3A max.
Voltage divider: 18,182
Amperes per Volt: 72
Dimension: 101 x 45 x 26 mm
Mounting hole: 79 x 38,1 mm
Weight: 151g

Scope of delivery

1x Holybro PM08 Power module
1x 40x40mm Fan
1x JST GH 6 Position Connector 15 cm
4x Sets of Screws, Washers, and Nuts

Shipping weight:	0,70 kg
Item weight:	0,15 kg

There are no reviews yet.

Unsere NEWS

QUADRUPED Gait Planning

QUADRUPED Gait Planning Based on QUADRUPED A1 Basic Knowledge Static & Dynamic Gait Planning

Lohnenswertes Upgrade für die X Carve

Die Lieferunge erfolge schnell unkompliziert und sehr zufriedenstellend. Die Montage benötigt seine Zeit, bei mir dauerte es etwas länger, da...

- Tom S., Inventables X-Carve Upgrade Kits

Lohnenswertes Upgrade für die X Carve

Die Lieferunge erfolge schnell unkompliziert und sehr zufriedenstellend. Die Montage benötigt seine Zeit, bei mir dauerte es etwas länger, da...

- Tom S., Inventables X-Carve Upgrade Kits

Lohnenswertes Upgrade für die X Carve

Die Lieferunge erfolge schnell unkompliziert und sehr zufriedenstellend. Die Montage benötigt seine Zeit, bei mir dauerte es etwas länger, da...

- Tom S., Inventables X-Carve Upgrade Kits

Social Media

Why not follow us on one of the following social media channels?

Holybro PM08 Power Module

Unsere NEWS

Das sagen unsere KUNDEN

Lohnenswertes Upgrade für die X Carve

Lohnenswertes Upgrade für die X Carve

Lohnenswertes Upgrade für die X Carve

Our Instagram FEEDS

Social Media