Holybro Kakute H743 Wing Stacks Pin header Micro M10

Holybro Kakute H743 Wing Stacks Pin header Micro M10

SKU: MBS-ENTB-98-04
GTIN: 0658917501839
Category: Pixhawk
Manufacturers:

Holybro Kakute H743 Wing Stacks

with Pin header
with GPS
STM32 H743 Processor
High-Precision / low-noise ICM-42688-P IMU

with or without pin header
with or without Micro M10 or M9N

€ 154,95

incl. 19% VAT , plus

Must be ordered. Ready for shipment in 21 days after order.
Delivery time: 8 - 10 Workdays (DE - int. shipments may differ)

The Kakute H743 Wing from Holybro is a fully featured flight controller with a design specifically for fixed wing and VTOL applications. This flight controller features the STM32 H743 processor with 480 MHz and CAN bus support, dual camera support and switch, ON/OFF pit switch, 5V | 6V/8V | 9V/12V BEC and plug-and-play GPS, as well as CAN and 12C ports.

Features

STM32H743 MCU running at 480 MHz
High-Precision / low-noise ICM-42688-P IMU
CAN Bus Support
Dual Camera Inputs switch
3 On-board BEC output 5V, 6V/8V and 9V/12V
9V/12V ON/OFF Pit Switch
On-board voltage & current sensor
Integrated BMP280 barometer
Plug-and-play GPS, CAN, I2C ports
Small & low-profile design fits into compact frames
Supports INAV (6.1.1 & later), Ardupilot (4.4 & later)

Technical data

MCU: STM32H743, 480 MHz, 1MB RAM, 2MB Flash
IMU: ICM-42688P (SPI3)
Baro: BMP280 (I2C4)
OSD: AT7456E (SPI2)
Blackbox: MicroSD card slot on SDMMC2
7x Uarts (1,2,3,5,6,7,8) with built-in inversion.
14x PWM outputs, 1x CAN, 5x ADC (Bat1/Curr1, Bat2/Curr2 and RSSI)
3x I2C (I2C1 and I2C2 for external devices, I2C4 for onboard sensors)
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator (Green)
USB/DFU Key Extender with USB Type-C
Dual Camera Inputs switch
5V/9V(12V) for Camera/VTX power switch
High-precision Current Sense (90A continuous, 220A peak)
Battery Voltage Sensor: 5K:25.5K (Scale 1800 in INAV, BATT_VOLT_MULT 18.18 in ArduPilot)
Static power 160mA@5V

Firmware Support

Ardupilot Target: KAKUTEH7-Wing(Ardupilot 4.4 or newer)
INAV Target: KAKUTEH7Wing (INAV 6.1.1 or newer)

PDB

Input voltage range: 10~36V (3~8S LiPo)
1x ESC power pads
Current Sense: 90A continuous, 220A peak. (Scale 275 in INAV, 36 A/V in ArduPilot)

BEC 5V output

Designed for FC, Receiver, OSD, Camera, 2812 LED Strip, Buzzer, GPS, Air Speed Sensor, etc.
Output 5.15 +/- 0.1V DC
Continuous current 2 Amps, 3A Peak

BEC 9V /12V output

Designed for Video Transmitter, Camera, Gimbal etc.
Continuous current 2 Amps, 3A Peak
12V option with Jumper pad

BEC Vx output

Designed for Servos
Voltage adjustable, 6V Default, 8V option with Jumper pad
Continuous current 6 Amps, 8A Peak

BEC 3.3V output

Linear Regulator
Continuous current: 200mA

Mechanical

Mounting: 25 x 25mm, M2 hole
Dimensions: 45x 30 x 13.5 mm
Weight: 28g with USB extender

Scope of delivery

1x Kakute H743-Wing Flight Controller
1x Power Board
1x Top Board
1x USB-EXT Board
1x GPS Module (Optional)
1x Electrolytic capacitor: 220uF 62v
2x XT60 60mm Power Cable
4x Sets 2.54 DuPont Pin
2x JST-GH 4Pin Cable
1x 15cm JST-SH 6Pin Cable (For USB-EXT Board)

Shipping weight:	0,20 kg
Item weight:	0,03 kg

Manufacturer Information Holybro

There are no reviews yet.

Holybro Kakute H743 Wing Manual

Others also bought:

3DR Radio Telemetry 433mhz 1000MW 2~3KM Data Telemetry

€ 134,95 *

Benewake TFmini Plus I2C UART (12m)

€ 63,95 *

Holybro Pixhawk vibration dampers Foam Pads

€ 9,00 *

CubePilot Orange Cube Standard Set

€ 1.428,00 *

Unsere NEWS

Flexible Robotics Financing | Unitree G1 EDU & Automation

Flexible Financing Options For Robotics

Flexible financing options for robotics: How to make automation affordable for your business Implementing robotics in your company can bring huge benefits, from increased ...

Lohnenswertes Upgrade für die X Carve

Die Lieferunge erfolge schnell unkompliziert und sehr zufriedenstellend. Die Montage benötigt seine Zeit, bei mir dauerte es etwas länger, da...

- Tom S., Inventables X-Carve Upgrade Kits

Lohnenswertes Upgrade für die X Carve

Die Lieferunge erfolge schnell unkompliziert und sehr zufriedenstellend. Die Montage benötigt seine Zeit, bei mir dauerte es etwas länger, da...

- Tom S., Inventables X-Carve Upgrade Kits

Lohnenswertes Upgrade für die X Carve

Die Lieferunge erfolge schnell unkompliziert und sehr zufriedenstellend. Die Montage benötigt seine Zeit, bei mir dauerte es etwas länger, da...

- Tom S., Inventables X-Carve Upgrade Kits

Social Media

Why not follow us on one of the following social media channels?

Holybro Kakute H743 Wing Stacks Pin header Micro M10

Unsere NEWS

Das sagen unsere KUNDEN

Lohnenswertes Upgrade für die X Carve

Lohnenswertes Upgrade für die X Carve

Lohnenswertes Upgrade für die X Carve

Our Instagram FEEDS

Social Media